Yahoo Finance

Bryan Schumaker

Thank you, Jeff, and good afternoon, everyone. Please turn to slide 6.
Revenue in the quarter of $632 million was down 4% sequentially and 6% year over year. Our non-GAAP EPS was $0.52, which was in line with our guidance range of $0.48 to $0.54. As a reminder, our non-GAAP results exclude stock-based compensation, amortization of intangible assets, and restructuring and other expenses.
For Q1, our non-GAAP gross margin was 10.1%. This represents a 30-basis-point decrease quarter over quarter and a 10-basis-point increase year over year. Non-GAAP operating margin was 4.6%, down 50 basis points sequentially, and 30 basis points year over year, impacted by the lower revenue base. Our first quarter non-GAAP effective tax rate was 25% driven by jurisdictional income mix.
Please turn to slide 7 for our first-quarter 2025 revenue by market sector. Semi-Cap revenue decreased 2% quarter over quarter due to some sequential softening while still growing 18% year over year. Industrial revenue was similarly down 2% quarter over quarter, driven by existing customer demand softness, not fully offset by new program ramps.
In A&D, revenue was up 4% quarter over quarter. The commercial aerospace demand remains consistent while defense continues to be robust. Within medical, revenue was down 12% versus the prior quarter. We continue to see demand softness in the sector led by medical devices.
Finally, AC&C revenue decreased 12% quarter over quarter. As anticipated, this decline was driven by timing-related weakness in both HPC and our communications business.
Please turn to slide 8 for trended non-GAAP financials. As you will see, despite the revenue headwinds among several of our end markets, we continue to focus on protecting gross margin, which again, expanded year over year. Meanwhile, operating margin declined slightly both sequentially and year over year.
Please refer to slide 9 and 10 for discussion on our balance sheet, cash flow, and working capital trends.
In Q1, we generated $32 million in operating cash flow and $27 million in free cash flow. Our cash balance on March 30 was $355 million, a year-over-year increase of $59 million. As of March 31, we had $121 million outstanding on our term loan and $155 million outstanding against our revolver, from which we have $391 million available to borrow.
Our Q1 2025 liquidity ratio was calculated by our debt covenant was 0.6, down from 0.9 in the prior year period. We invested approximately $4 million in CapEx during the quarter, primarily in support of our Malaysia and Thailand facilities. In support of returning capital to our shareholders, we pay cash dividends of $6.1 million in the quarter.
We also repurchased $8 million of our outstanding shares. At the end of the quarter, we had approximately $142 million remaining in our existing share repurchase authorization.
Our cash conversion cycle in the quarter was 86 days, improving 3 and 8 days sequentially and year over year, respectively. Inventory days were up slightly sequentially, which was more than offset by improvements in accounts receivable and payables.
Please advance to slide 11. Let me now turn to our guidance for our second quarter of 2025. We expect revenue to be within a range of $615million to $665 million. While first half revenue is expected to decline mid-single digits year over year, we expect revenue of mid-single digits in the second half.
We expect non-GAAP gross margin to be between 10.2% and 10.4%, which is consistent with our performance over the last several quarters. With those assumptions, we would expect non-GAAP operating margin to be between 4.8% and 4.9%.
On a GAAP basis, we expect expenses to include approximately $5.3 million of stock-based compensation and $4.7 million to $4.8 million of non-operating expenses, including amortization, restructuring, and other charges. Our non-GAAP diluted earnings per share is expected to be in the range of $0.52 to $0.58.
Interest and other expenses are expected to be approximately $4.2 million. We expect our Q2 effective tax rate will be between 24% and 26%. Our weighted average share count is expected to be approximately $36.7 million.
Regarding free cash flow, we expect our Q2 capital spending to be $15 million to $20 million, primarily related to our Penang facility expansion. In addition, our Q2 cash flow performance will be negatively impacted by a $10 million legacy tax assessment related to a 2016 custom audit in Mexico, which was reflected in our Q1 2025 GAAP results. In April, we also paid our final installment of the 2017 transition tax, which totaled $20 million.
Q1 marks the eighth quarter in a row of positive pre-cash flow, and we believe we are structurally positioned to continue this trend once we get past Q2, which includes the tax payments noted above.
And with that, I would like to turn the call back over to you, Jeff.

Jeffrey Benck

Thanks, Bryan. Please turn to slide 12 for a discussion of our performance and outlook by sector.
Our Semi-Cap revenue grew an impressive 18% year over year in Q1, which was similar to our Q4 performance and clearly a multiple of the market's growth. This performance was driven by ramping wins and share gains we have achieved over the last few years.
The broader industry recovery continues to be mixed due in part to the competing forces of AI semiconductor growth, evolving restrictions on sales of advanced wafer FAB equipment into China, increased domestic demand and support of new FABs coming online in the US, and capital spending paused due to tariff uncertainty. All things considered, we continue to expect incremental growth in the sector, which has been a focus of investment over the last several years.
To that point, this past quarter, we broke ground on a new facility in Penang, Malaysia in support of our future growth plans. Further providing us confidence in our continued growth, I was pleased with our breath of new winds in the Semi last quarter, which cut across our precision technology, engineering, and EMS capabilities.
Turning to our industrial sector. Revenue performance was down slightly in Q1. Although it may take a few quarters to return to year-over-year growth in this sector, I'm incredibly encouraged by our momentum in terms of new bookings, which was the strongest performance for the company in Q1. These wins included a new digital display customer and new programs with a geospatial solution provider who's expanding with us.
Over time, I'm confident that the industrial sector will be one of the greatest sources of future growth, both as a function of our greenfield opportunities and an expectation that outsourcing will become a greater consideration within the sector over the coming quarters.
Within A&D, this sector continues to perform well for us, driven by strong defense demand and growing new programs in space, while commercial air demand remains steady.
Revenue in the quarter was up 15% year on year, based on our existing wins and new bookings. We expect growth both sequentially and year over year throughout 2025.
Supporting our confidence this past quarter, we saw continued bookings momentum across EMS and engineering opportunities supporting A&D, notably within space and defense subsectors. I'm pleased with our A&D team's performance and look forward to continued momentum over the foreseeable future.
In medical, continued demand softness in existing programs and customer delays in new program ramps weighed on our results, both sequentially and year over year. We are confident we have not lost share with any of the existing programs, but as we've highlighted previously, this market recovery has taken longer than anticipated.
In the meantime, we've continued to make significant progress in securing new wins within the sector across both manufacturing and engineering. This comes within our traditional medical and growing life science business, which I'm very optimistic about. As these take time to ramp and our existing programs begin to recover, we're looking forward to a return to year-on-year growth from this sector in the second half of 2025.
Finally, our AC&C revenue declined more than anticipated in the quarter due to new program timing issues with both the next-generation HPC platform launch that's continued to push to the right and the delayed ramp from a new 5G wireless transport family of products and communications.
As we've been saying for several quarters now, we expect AC&C revenue growth to remain challenged through much of 2025. However, within computing, our deep expertise in liquid cooling and complex computer system assembly is leverageable beyond HPC, and we're working on that.
We clearly have proven capabilities from helping to build the subsystems that went into the fastest supercomputers on the planet. Combined with solid booking strength in the quarter, we believe we're well positioned to return to growth in AC&C as early as Q4 of this year.
In summary, please turn to slide 13. Our first quarter of 2025 results build on our foundation of delivering consistency. We've been conscious about what sectors we play in and continue to invest where we can add greater value. This has allowed us to improve our mix and increase our value add, which has resulted in us now steadily delivering greater than 10% non-GAAP gross margins, despite a challenging revenue environment.
While today's global macroeconomic uncertainties create short-term risk, they also create mid- to long-term opportunities based on our strong North American footprint and our global reach enabling production closer to consumption.
Furthermore, we're responding to customers' increased propensity to accelerate outsourcing, particularly if they're only building products in one country in their own factory, as they realize there is a need to better optimize their supply chain leveraging a partner like Benchmark.
Our opportunity pipeline and inbound court activity from new large customers is very encouraging. While a return to year-over-year growth is taking a quarter or two longer than anticipated given market dynamics, there's no question it's in flight. And barring a recession brought on by tariffs, we expect to deliver sequential growth throughout the balance of the year, which should allow us to grow year over year in the second half.
In the meantime, we will continue to prudently manage our spending to protect profitability and generate free cash flow for the full year.
As it relates to the return of capital, we tend to consistently support our quarterly dividend while stepping up our share repurchase activity, and we will continue to evaluate M&A opportunities as they come to us that align with our strategic plans.
Let me wrap up by saying this. Regardless of the market environment, Benchmark will stay on course and continue to invest in strategic growth. We're also going to continue to support our customers as a trusted partner and advisor.
We will stay focused and win new business in the sectors in which we participate. There are plenty of organic opportunities for us out there, and we have the right business development organization now to capture our fair share.
I look forward to updating you on our success in quarters to come. With that, I'll now turn the call over to the operator to conduct our Q&A session.

Question and Answer Session

Operator

(Operator Instructions) Jim Ricchiuti, Needham & Company.

Jim Ricchiuti

Hi, guys. Good afternoon. So Jeff, it sounds like you're seeing some customers pausing, others pulling in. Is the net result of this more of a headwind for you, and are the pullings coming into Q2 from the second half?

Jeffrey Benck

Yeah. What I would say is right now, we see things balancing out so we don't see it tipping one way or the other. I mean we've seen some of our competitors say they're not seeing movement. We're just reflecting what we're hearing and seeing from customers.
What I would say is a few customers are nervous about the second half and where the tariffs may go when this three-month pause is lifted, and we see where things land out with executive orders. I also think if you're in an area that's got a particularly high tariff on it, you might wonder how is that going to shift and there are other things that can be done.
So I would say more activity than normal here. But that being said, I don't see it overly biasing to helping us more in Q2, or even really materially hurting. It's just there's just a little more uncertainty. But I would say in the balance it's kind of canceling each other out.

Jim Ricchiuti

Got it. And with respect to maybe your existing customers that are looking to do some supply chain optimization or some of the ones you alluded to there, newer, are there some initial headwinds that you're going to see from this as customers evaluate their supply chains and you try to accommodate them?

Jeffrey Benck

I would tell you that our win -- a couple of the bids that we're competing on and looking to close, we've had a few that have taken longer that have elongated while folks contemplated. Think about if you were thinking of going to Mexico, but maybe you were contemplating Thailand as well. You're now going, okay, USMCA seems like it's a good thing.
I mean, we're excited that over 95% of our products are qualifying for USMCA, so we're able to do that without tariffs. So that's great. But earlier on, there was a lot of concern about 25% coming from Mexico, and now you've got Thailand at 10% or Penang at 10%. So it's definitely causing folks to contemplate and have us run some different scenarios and look at different things.
And so, I would say that's elongating the cycle a bit on the new bookings for sure. And so we're seeing some of that happen. And that's kind of -- I'm not sure if that's exactly where you're kind of going with your question, but we've seen that cause some of that -- just that uncertainty.

Jim Ricchiuti

That's helpful. And last question from me. Jeff, you sound excited about some of the traction you're seeing in industrial. Where are you seeing it? Are these mainly existing customers, new customers?

Jeffrey Benck

It's a balance of both. We see some good follow-on business in some of the electronic controls, like for example, in HVAC subsectors and things like that. But beyond that, it just continues to be new growth in AGVs and in some of the automation solutions.
And so we're seeing some nice new incremental wins, but then also some repeat business as customers look to do more with us. So I would say it's fairly balanced at this point.
We also are seeing some kiosk activity. I mean there's just been a number of new subsectors that we're seeing incremental opportunities, maybe one other one where we've got some recent wins is in the gaining subsector which would fall under our industrial as well.

Operator

Steven Fox, Fox Advisors.

Steven Fox

Hi, good afternoon. For my first question, I just want to make sure I heard correctly. Sounds like you're saying, first half is down mid-single digit percentages year over year, and the second half is up mid-single digits year over year. Did I hear that correctly?

Bryan Schumaker

Yeah, that's correct, Steve. And if you look at it sequential growth quarter over quarter as we look throughout the year.

Steven Fox

And so my question is like in the second half when you see that reverse and trend, like obviously, defense and Semi-Cap are doing well, but like is there anything else you're sort of seeing a reversal of fortune that we should count on for the second half based on current (inaudible)?

Jeffrey Benck

We're certainly seeing -- it's interesting. It may be a little different than last quarter. We're seeing some -- finally some pick up in medical and see medical having the opportunity for a stronger second half. And some of the current customers that have been down are starting to show more signs of life from a growth perspective.
And also, as we talked about in the script, I think late in the year, we see computing telco with a new win on the 5G side of things. And maybe some of that's frankly easier to compare as well, but we start to see year-on-year growth there.
And industrial, I think it's a little bit of wait and see. We certainly see a lot of good new bookings, but those do take time to kick in. And we saw a little bit of softness in test and measurement. So industrial right now, there's probably more -- a little more uncertainty there. But we're probably -- besides Semi and A&D, we think we'll continue to be strong through the year as we talked about. So maybe medical adds to that and then we start getting more help as you get towards the end of the year.

Steven Fox

Great, that's helpful. And then just a couple other specifics. So I wasn't clear when we think about sort of high-end compute programs. Do you have a line of sight to others ramping down the road at this point and they've just been delayed? Just if you could sort of give us an expectation for how that business comes back, and then I have one more.

Jeffrey Benck

Yeah. So we do have anticipation that will fully participate with the partners that we've been with on the next generation. It's just the actual chip set and platform seemed to continue to move to the right, which is kind of pushed us beyond our expectations that we might see improvement later this year.
I guess what I would say is it was a little more pronounced down in the front end. And sometimes when you're working on these really large supercomputers, we've talked about helping build three of the top 5 supercomputers in the world that are built on this high performance computer platform. While you may not have always Lawrence Livermore lab putting in a new platform, there's a lot of smaller systems that leverage that same platform that get built out.
And so we sort of expect some fill in from some of that. And so it's not like everything's resting only on the new platform, but we did see a more pronounced impact in the first half, which dragged down our compute business in that.
We think that certainly there's new product introduction work that goes on in the second half, but the real, significant ramp on HPC will probably be more next year unfortunately, although, like I said, we could see some fill in with some smaller systems in the second half, and certainly we're engaged in those kind of things.

Steven Fox

Great. And then just lastly on Semi-Cap, I mean, so Jeff, you talked about a lot of sort of negatives, but you're still growing 18%. So I'm just trying to understand, like I appreciate the disclosure, but like how many of those things are having a material impact on the business versus what you expected to see?

Jeffrey Benck

We started the year where it's like -- it felt like really good momentum in Semi, like stronger than even anticipated. Obviously, 18% of your year is great growth, so I'm not discounting that. But it's like looking out to the back half, I thought, okay, we're off to the races again.
And certainly, right every second AI and this is a driver and it drives some of the most advanced nodes and all of that, the reason that I talked about some headwinds is just talking to all of our large customers, we're seeing some further restrictions on China and selling into China. And in some of these very large OEMs, it might be 20%, 25%, 30% of their traditional sales have been into China. So if that gets restricted further or some of the restrictions that have happened have caused some order softening there.
But then at the same time, we've got a brand-new fab here in the Phoenix Valley that keeps building out, and as that comes online domestically, we see demand for wafer fab equipment to go into that.
So I guess what we're saying is in balance, like there's headwinds and there's tailwinds, we still think we'll grow at a few -- at a multiple of the market growth rate, which I think right now, what I've read recently is maybe 3%. We're certainly looking to do quite a bit better than that. But I just didn't want everybody to think that, oh, Semi is just up to the right and there's no risk here. So maybe that's where the transparency is coming from.

Operator

Jaeson Schmidt, Lake Street.

Jaeson Schmidt

Yeah, thanks for taking my questions. I know you highlighted in the script that you saw some nice bookings across a number of verticals. Were your bookings up sequentially in Q1?

Jeffrey Benck

They were up year on year, but not up kind of more flattish sequentially from our fourth quarter. And I think we anticipated a little stronger, and I think we talked a little bit about some of the delay where there's a few larger deals that the customers just kind of waiting to see where things bottom out on the tariff front.
And so, those haven't gone away. In fact, one recently closed in 2Q. So we'll see, I think, things continue to kind of free up once people have a better certainty of where the tariffs are going to land and whether their strategy still makes sense, right?
But it was a good growth year on year for us for bookings. And I know we've kind of gotten away from covering a lot of specifics, but we try to give you some color as to how we're feeling by sector and what kind of things we're winning and we shared that in the script.

Jaeson Schmidt

Okay, that's helpful. And then the expected rebound in medical here in the second half, is that going to be really driven more by channel replenishment or new program launches?

Jeffrey Benck

Well, for a long time we talked about medical being down because the channel inventory and some of the burn off of that and that working through. So I don't know so much that people are going to build up, that OEMs are going to build up inventory again, but just -- there's -- what we witnessed is some of our customers, their actual business wasn't down as much as the softness we were seeing, and the only way you could really get there from our dialogue with them was, well, they had inventory in the channel that they were working through even though they were still seeing growth. We weren't.
And we certainly think that we will see our base get better. But then we've also got some new competitive takeaways that we're excited about with a couple of new logos in the medical space. So I think both will work together to help us there.

Jaeson Schmidt

Got you. And then just the last one for me and I'll jump back in the queue. How should we think about the tax rate in the second half of this year?

Bryan Schumaker

Yeah. So as we're modeling it out, I mean, it drops slightly like when we gave Q2, and then if you look out '23 -- for Q3 and Q4, it drops a little bit. So I call it 24% for the year. So as we look at, I mean it's 23% to 26%, is kind of how we're modeling it out. So there's a range there and we're going to drive -- we have a lot of focus right now on our strategic plan around tax and we're going to continue to look at that and how we can drive that down, but that's kind of the model for the remainder of the year.

Operator

Anja Soderstrom, Sidoti.

Anja Soderstrom

Hi, and thank you for taking my questions. First, in terms of medical, the inventory levels there, do you feel like they have normalized and that's why you expect to see growth in the second half?

Jeffrey Benck

I mean, certainly, yeah, I think we do believe that a lot of our aims have worked through the bulk of the inventory was built up. As you can imagine, Anja, we're like one step removed, so we don't always get perfect visibility by product line. But we knew in general there was a lot of dialogue over the last 18 months about where they were with the inventory and needing to work through it.
I think that's really why we're seeing a reflection of the demand order book pick up, really even Q3 and beyond, because we do -- we are now getting like six months of visibility and we see some improvement there. So I think that that is sort of playing out for us as you described.

Anja Soderstrom

Okay, thank you. And you also mentioned your large footprints in the US and North America, but what kind of capacity utilization do you have there? And what availability do you have to move projects over there?

Jeffrey Benck

Yeah, we don't kind of publish really our capacity by site, but just suffice to say I think we said over a third of our footprint is US-based. Given the softer macroenvironment, we just have a lot of opportunity even with some of the consolidation we've done. We've gotten more efficient in the factories we're in.
We're trying to make sure that we have a lot of open space because customers a lot of times, particularly new OEMs, will come and say, okay, where can my product sit here? And we just believe that we know from where we sit that we can really accept quite a bit of incremental business. And we're certainly seeing with what's going on with the tariffs and the desire to potentially near shore or reshore domestically, we're seeing some nice inbound incremental opportunities that are coming forward.
And I kind of tried to touch on this in the script that if you think about an OEM that might be building in their own factory, and right now, large OEMs that are in multiple sites with us are saying, oh, I might want to shift some of my Thailand demand to Mexico, or maybe I'm going to move China to Thailand and they have that flexibility if they're in multiple sites with us, but if you're like building your own product only in one site, you really don't -- you really miss that opportunity. And I think that's causing some OEMs to say, maybe we shouldn't be building everything ourselves. If we were leveraging a partner like Benchmark, they could help us pivot.
We certainly are standing at the ready to help a few customers. I think a lot of customers, there's a little bit of wait and see right now. Like we don't see huge demand shifts, but we see a few that have said, you know what? I'm not comfortable just being in Asia, Southeast Asia, or just being in Mexico. I may want to split that production. And so that's the kind of opportunity we offer.
But we certainly feel like that this is a great opportunity for us. We've got a brand new site in Guadalajara that came online at the end of last year and is ramping some new medical customers, for example. And then there's things that just make sense to be done in the US, whether it's like HPC going to a national lab or you think about some of the build out that's happening with data centers and such. I mean that's an opportunity.
We talked a little bit about our water-cooled infrastructure. That comes from our HPC space, but you kind of say, well, there's no question we can't help with some of the more sophisticated data center solutions that are water cooling-based. And we're having some early discussions on that and trying to leverage it.
So we just think that's a bit unique for us that we are not -- as you all know, we only have one factory in China, but we've got 10 in the US. So if people want to build more product domestically, we're ready to go.

Anja Soderstrom

Okay, thank you. And just in terms of the cash flows, nice improvement there in cash conversion. Is there room for further improvement there and do you have sort of a target?

Bryan Schumaker

Yeah, if you think about kind of inventory, I mean, we're going to continue to drive the days inventory down on a kind of factor of. Now what I would say is you could have some improvements on that cycle, it could be offset by some of the growth in new program launches. And then on the other side, AR, I mean we're going to continue to work that along with AP.
So there's no target out there, but again we've always talked about the 4 turns on inventory, whereas now, I mean the 4 turns today where we want to get closer to the 5 turns. So that's what we'll continue to drive towards on that front.

Jeffrey Benck

Yeah, that's what -- I would say we're not satisfied at 4. There is good improvement to get there. If you take net of advance payments, we're probably we are north of 5, but we see opportunity to go further. I think as Bryan said, growth and bringing on new customers where we need to invest in some inventory could be a headwind as we get in the later part of the second half, but we certainly strategically think that we need to be north of 5.

Anja Soderstrom

Okay, thank you. And just one last one on the currency with the sort of the pressure on the dollar. Are you hedging at all.

Bryan Schumaker

Yeah, what I would say is if you look at our overall revenue top line, I mean we're about 80% US dollar already. We have some natural currency hedges over in Europe. We do offer-- or we do some hedging in addition to that. Now, as you've noted, I mean, there has been significant fluctuation in currencies, but for the majority of it we are hedged.

Operator

Melissa Fairbanks, Raymond James.

Melissa Fairbanks

Hey, guys. Thanks so much for squeezing me in. Jeff, I just wanted to follow up on a couple of things that you've said in answering a couple of different questions.
The first was about elongating the cycle in terms of the new bookings that you're getting. I've been around a while. We've seen a lot of macro uncertainty in the past, but this really seems kind of unprecedented where some of these delayed decisions, it's reliant upon a lot of moving parts and they seem to be a little bit more weighty than what we've seen in the past so. So knowing that the lead times for a brand-new program typically extend into several quarters, I've got two questions.
One is how quickly can you pivot or launch a new program in a new facility based on what your customers want? And two, does this potentially extend a bit of this headwind beyond just the next few quarters? Because if customers are delaying their decision making, that means we're slower to actually ramp the new programs and then we're slower to bring in that new revenue. That may be a very loaded question, and I don't really expect an answer, but --

Jeffrey Benck

No, it's okay. I mean, I can give you at least my view of it. I think that moving a customer at an existing facility, it's pretty challenging to do it in a quarter. But if we're building it and we've got obviously the manufacturing, inside knowledge, and it's something that we're building in another facility, we can leverage our teams for their know-how and that hidden factor that sometimes you deal with.
I think we've been successful in doing something in six months, having something fully moved and ramped pretty significantly. What's exciting about -- even though some of these things are delayed, some of the deals that we're looking at are actually competitive takeaways. What I like about those, they're already in production.
So when you have a new medical product that, oh, I got to go get FDA certified and I got to build samples and then I got to go test it for a year, that can take two years. Some of the deals that we're looking at that have been delayed or strung along, their product that's already been built either in a region or maybe domestically and they're looking to move to a lower cost region, I would say even though it's kind of elongating those can happen quicker when you win that kind of business versus the green field or the brand-new life sciences product right there, that we may be helping doing the engineering on, right?
And so we kind of have a mix of both, but some of what I'm seeing more recently are really competitive takeaways where they're already building the product in the region, they want to move to me in the region. But at the same time they're like, well, if we're going to move to you, do we move to you in Mexico or do we move you in the US? And can you call me in both your factories, right?
So some of that is what -- and it is, I think we are in unprecedented times in terms of it just being very dynamic and you've got to be flexible. But really what's kind of interesting is more of our OEMs are coming to us wanting to have the strategic sourcing discussion about how do we think about it, how can you help map where I should go, how I think about not only what you build, but the supply chain. Those are some pretty interesting discussions that we can bring a lot of experience and knowledge to bear and help with those.
So I don't know that this is a multi-year kind of cycle thing, but certainly everybody's kind of waiting to see to some of these tariff agreements get done and then this stuff continue to progress.

Melissa Fairbanks

Or do they stick.

Jeffrey Benck

Yeah, or do they stick or do we see kind of a restart of what we saw at the beginning of April, which really none of us want none. None of us want that.

Melissa Fairbanks

Yeah. Actually, the competitive takeaways aspect of it, that's actually very exciting. That's really good news. So I'm happy to hear that. That's very good news.
And then maybe just one quick follow-up to -- one of your answers to an earlier question was about some of -- there were OEMs that maybe do all of their own manufacturing internally today, whether it's across multiple facilities or within one region in particular, and now they're looking to diversify.
Are there opportunities for you to go in and acquire a customer's manufacturing facility and then kind of leverage that capacity? Or are these not -- is this not something that from a capital return strategy makes sense for you guys?

Jeffrey Benck

I mean we've done operate in place and and we're okay with lift and shift. I mean, I don't want to acquire a factory and pay a premium on it. You know what I mean? So we wouldn't really do that.
But what we've jointly invested with a customer. We've also taken things over. But we're pretty sensitive. Like, if you tell me, hey, can you take over this factory that's in Louisiana and I've got no facilities, no infrastructure, and I'm just going to ultimately look to move that to Huntsville, why would I do that? But if it happens to be in a footprint where I'm at and I can leverage a team that I've got there, I think we're open to that discussion.
But what I was reflecting is really more -- I'm an OEM, maybe mid-market, but I'm building all in my own factory in Indiana. And I'm now contemplating tariffs on components of material coming into my factory in Indiana that may come from Taiwan, Singapore, China, Malaysia. And now I'm thinking, okay, now I've got to pay the tariffs. I'm still building in the US. I can't move the whole supply chain.
So what do I do? Well, you might say, if I was building in Mexico, I could assemble if it's the right HSC code and I could bring it in the country without a tariff, okay, maybe it's time to think about outsourcing. That's kind of how we're thinking about it.

Operator

Jim Ricchiuti, Needham & Company.

Jim Ricchiuti

I just wanted to go back to the comments about Penang. Just remind us of the timing of that ramp. I know the building is just getting started, right?

Jeffrey Benck

Yeah, well, this is -- the groundbreaking that we did in the first quarter we talked about on the call, that's our fourth facility there, so it's a brand-new facility. It's going to give us more vertical integration on the island, and it's going to be exciting because you know we can go from complete frame build and do painting and a whole host of other things along with a bunch of clean rooms.
But we're obviously big in production already in Penang. And we're seeing, as reflected in our 18% growth in the first quarter, we're seeing nice growth across several OEMs there and we've got one particular OEM that's kind of new to us there that's ramping nicely. So we kind of look for us to continue to grow year over year in Malaysia.
The new facility really won't be fully online until next, but the investment's really going in this year. And that's really with an eye towards -- that we're going to continue the momentum and that the semi-market, while it might have its fits and starts and this has been an unprecedentedly different recovery, we're still long in the space and feel like we have a differentiated value proposition there. And so we're investing long term.
But I don't want you to think that new buildings required for us to be able to grow, because in the last down cycle we freed up quite a bit of capacity. And I should also remind you we opened a brand new building in September of last year that was building three, so that's now fully online. So that gave us more headroom. This is just building four that we started in first quarter this year.

Jim Ricchiuti

And this building will be exclusively for Semi-Cap customers, right?

Jeffrey Benck

It won't be exclusive, but we're certainly starting there. We do see an opportunity for doing medical and other aerospace machining. But right now, the win pipeline is pretty heavily dominated towards semi.

Jim Ricchiuti

Got it. And you'll have the flexibility depending on what happens, so --

Jeffrey Benck

Yeah. It's not an exclusive semi factory per se is what I'm saying.

Jim Ricchiuti

And just lastly, Jeff. I feel like I've heard you mention M&A the last couple of calls. And I don't want to make more of it than it is, but just is that geared toward potentially looking at expanding in one vertical? Or is it adding some technology capability? Presumably, are these more tuck-in type that you'd consider? And how active is this?

Jeffrey Benck

There is just a -- I think with -- it's interesting. There's a lot of private equity firms that have been invested in manufacturing for six to eight years. And so I think every week, there's a couple of opportunities that kind of come to us and cross our desk.
And we've said we're going to be very picky and disciplined. And there are some areas that we might say, look, this could fill a gap for something that where customers have an interest and not. But we continue to believe there's plenty of organic opportunities.
So it's not like M&A is pressing us. But we do think it could augment the strategy. And as we brought inventory down and created some capacity, it's something that we can certainly look at, but we're really sensitive to dilution and want to do things that can be accretive in a fairly short period of time.
But we're not, at this point, looking to expand into necessarily a new sector than the five that we support. But we will look at where can we enhance capabilities in high value-add areas in our portfolio.

Operator

(Operator Instructions) There are no further questions at this time. I'd like to turn the call over back to Paul Mansky for closing comments. Sir, please go ahead.

Paul Mansky

Thank you, Constantine, and thank you, everyone, for participating in Benchmark's first-quarter 2025 earnings call. We'll be participating in the Sidoti Small-Cap Virtual Conference on June 11. For updates to this and other upcoming investor conferences and events, please check the Events section of our IR website at ir.bench.com.
With that, we thank you again for your support and look forward to speaking with you soon.

Operator

This concludes today's conference call. Thank you very much for your participation. You may now disconnect.