Q PRECIOUS AND BATTERY METALS DRILLS 4.2% Copper, 4% Zinc, with Silver and Gold 0.83% Copper Equivalent over 25.45 Metres LA CORNE SOUTH PROJECT, Val d’Or Quebec

In This Article:

VANCOUVER, BC / ACCESSWIRE / September 9, 2024 / Q Precious & Battery Metals Corp. ("QMET" or the "Company") (CSE:QMET)(OTC PINK:BTKRF)(FRA:0NB) is very pleased to present the results of core samples taken from the first hole of three holes completed to date at their La Corne South project.

Results from hole 24LCS-01 indicate robust VMS-style mineralization containing elevated copper, zinc, silver, and gold. The significant downhole intercepts are as follows:

  • 122.75-123.3 - 4.2% copper, 4% zinc, 0.17 ppm gold, and 30.3 ppm silver

  • 123.3-123.85 - 1.9% copper, 3.17% zinc, and 14.7 ppm silver

  • 123.85-124.4 - 0.79% copper, 1.3% zinc, and 7.33 ppm silver

  • 125.5-126 - 2.61% copper

*True widths of mineralization have not yet been determined

The above intercepts are within a larger envelope of mineralization from 102.15 metres to 130.45 metres downhole. Elevated results were obtained from semi-massive to massive sulphides including pyrite, pyrrhotite, chalcopyrite, and sphalerite as logged by the geologists. Using weighted averages combined with copper equivalents, the following has been calculated for the higher-grade zone intercepted in hole 24LCS-01:

  • 1.8 % copper equivalent** over 6.1 metres (122.75-127.6), including

    • 2.56% copper equivalent over 3.95 metres (122.75-126.7)

The weighted average for the total mineralized zone from 102.15 metres to 127.6 metres is calculated at:

  • 0.83% copper equivalent over 25.45 metres

**Copper equivalents utilize USA $80 per gram gold, $0.95 per gram silver, $1.30 per pound zinc, and $4.2 per pound copper.

Several samples from hole 24LCS-01 also returned elevated nickel (250-650 ppm, or 0.5 to 1.3 pounds Ni per tonne) that may add to the overall value of the mineralization.

The below table summarizes the drill hole collar information.

HOLE id

Azimuth

Dip

Depth

UTM E

UTM N

LCS-24-01

040

-45

144.6

297970

5354750

LCS-24-02

055

-45

144

297970

5354750

LCS-24-03

054

-45

137.65

297942

5354812

The three drill holes completed to date were designed to test a coincident TDEM conductor and magnetic high discovered previously by QMET geophysical surveys. The company completed a total of 426 metres of drilling that tested an approximate 50 metres of strike length of the first target. The results from hole 24LCS-01 indicate that significant copper and other metals are associated with these geophysical targets, which bodes well for continued drilling of similar targets outlined on the property. The company is waiting for results from holes 24LCS-02 and 24LCS-03 to assist in evaluating the mineralization potential.