Gold Terra Announces Start of 2025 Drilling Program Targeting High-Grade Gold in the Campbell Shear, Con Mine Option Property, NWT

In This Article:

Gold Terra Resource Corp. (TSXV:YGT)(Frankfurt:TX0)(OTCQB:YGTFF) ("Gold Terra" or the "Company") is pleased to announce the start of its 2025 wedge hole drilling program that will continue targeting the prolific Campbell Shear (CS) from master hole GTCM24-056 on the Con Mine Option (CMO) Property. Hole GTCM24-056 was drilled to a depth of 3,002 metres and will serve as a master hole from which to branch off with as many wedges as possible to evaluate the CS 600 metres below the current Robertson shaft depth (1,900 metres), up-dip and laterally. The wedge hole drilling program allows for a more efficient and cheaper evaluation of the CS rather than drilling holes from surface.

The objective of the 2025 wedge hole drilling program is to continue testing for high-grade gold in the CS (past production of 5.1 Moz @ 16 g/t, refer to the Oct. 21, 2022 Technical Report) on the Con Mine below the historic Con Mine underground workings. The CMO Property is under option from a subsidiary of Newmont Corporation and is 100% acquirable by the Company upon fulfillment of certain conditions set out in the CMO Property Option agreement, as reported in the Company's news release dated November 22, 2021. The target is located downdip from the 5.1 Moz mined gold deposit plunging steeply to the south between elevation 1,900 metres (Robertson shaft depth) and 2,600 metres.

Chairman and CEO, Gerald Panneton, commented, "Building on our work in 2024, we are pleased to start our 2025 wedge hole drilling program to assess the high-grade gold potential of the Campbell Shear below the Robertson Shaft. This approach is a very efficient and cost-effective way to assess the CS at depth. We anticipate that the wedge holes will open a large under-explored area down plunge from the prolific CS that is 600 metres to 800 metres below the existing infrastructure. Our aim is to eventually add additional high grade gold ounces to our next MRE (Mineral Resource Estimate)."

2025 Wedge Hole Drilling Program Highlights

The wedge hole drilling program is starting on January 10, 2025. The 2025 drilling program will consist of an initial plan of wedge holes (5 to 7) with an approximate estimate drilling length of 3,000 metres.

Figure 1 below is a cross-section showing the master hole GTCM24-056 from which numerous wedges of varying lengths are placed along to intersect the target area in depths shallower than that of the master hole. The first wedge is planned to start at 2,000-2,100 metres downhole with a CS target of 2,700 metres, or 800 metres below the Robertson shaft. Wedge holes are designed to target the CS at depth first, and then up-dip with each successive wedge being higher up the master hole. The CS was initially intersected at depth in deep hole GTCM23-055, which intersected 12.63 g/t Au over 1.7m in the CS structure approximately 150m below the Con Mine workings, demonstrating the potential of the CS at depth.