Yahoo Finance

2025 Winter Drill Program

Foran's winter drill program is focused on confirming the continuity of Tesla mineralization and tightening up the drill hole spacing across central parts of the zone as we work towards completing a maiden resource estimate for Tesla. To date, Foran's drilling has defined multiple lenses of copper and/or zinc rich mineralization over a strike length of at least 1,200m and 500-700m in the down dip direction. The program will target a series of larger 200-300m gaps in the current drill spacing across the Tesla Zone and the Bridge Zone, utilizing wedging and directional drilling technologies to maintain the efficiency and precision of the drilling at tighter spacings. A long section is provided in Figure 1 showing the target areas designated for the winter drill program.

The program began on January 2, 2025 and is expected to run until the end of March / early April, depending on ice conditions. The 2025 winter program is the largest drill program in the Company's history, utilizing eight drill rigs to capitalize on the favourable frozen winter conditions and encompassing over 30,000m of drilling. Continued exploration success at Tesla has given the Company confidence to continue to strategically deploy exploration capital, with consecutive increases in year-over-year drilling at Tesla (~22,200m of winter drilling in 2024).

Final 2024 Tesla Zone Results

Final assay results have also been received from the 2024 infill drill program at the Tesla Zone. The summer drill program at Tesla was completed from land using directional drilling technologies to obtain perpendicular intersections through the zone from the footwall side and infill larger gaps within the current drill hole spacing that are accessible from land.

This news release provides the results from a series of wedged holes (TS-24-29w1, TS-24-29w2, TS-24-30w1 and TS-24-34w1) completed from previously released parent holes (see Table 1 below and Foran news releases from October 7^th and November 18^th, 2024 for details on the parent holes) that cover approximately 300m of strike length across the Tesla Zone, along with the results from one additional drill hole (TS-24-32) which was completed from the north shore of the lake, targeting the down dip expansion of the newly discovered gold zone. The new drilling builds on previous results and continues to confirm the continuity of mineralization across the Tesla Zone.

Since its discovery in 2022, the Tesla Zone has now been intersected by 51 drill holes and wedges (Figure 2) with mineralization defined in multiple lenses consisting of zinc and/or copper rich massive to semi-massive sulphides and associated copper-rich stringer and breccia zones over a strike length of 1,200m and 500-700m in the down dip direction where it remains open in all directions for continued expansion.

A total of approximately 10,810m of drilling was completed during the 2024 summer-fall program as a series of pilot holes and wedges from four main collars located in the central part of the Tesla Zone, targeting larger gaps in the current drill hole spacing. Drill holes were collared on land covering approximately 300m of strike length along the zone and drilled from the footwall side using directional drilling to provide perpendicular intersections into the mineralized horizons. A total of eight pierce points were obtained through the Tesla mineralized zones during the program.

A longitudinal section is shown in Figure 3 which provides the locations of the wedged hole intersections relative to previous drilling as we continue to infill the southern end of the current Tesla Zone mineralization and step out down dip to the north.

2024 Drilling Results

TS-24-32 – Test of Gold Zone continuation at northwestern end of Tesla Zone

TS-24-32 was drilled from the northeast edge of Hanson Lake and targeted a thick package of gabbro which in nearby holes had hosted multiple occurrences of gold-rich mineralization related to moderate quartz-carbonate-albite alteration and veining (see Foran's September 4, 2024 news release). TS-24-32 successfully intersected several zones of this style of mineralization, highlighted by 5.0m grading 2.02 g/t Au and 56.8 g/t Ag, including 1.0m grading 5.76 g/t Au and 111.0 g/t Ag along with several narrower zones of similar mineralization. This new gold zone appears to remain open for further expansion with additional drilling.

TS-24-30w1 - Central Tesla Zone

TS-24-30w1 was drilled as a downdip wedge hole from the previously released parent hole TS-24-30 (see Foran October 7, 2024 news release) which intersected a broad zone of mineralization, including a 3.4m massive to semi-massive sulphide lens grading 4.29% Cu, 8.21% Zn and 55.5 g/t Ag, underlain by a thick copper-rich breccia and stringer zone grading 2.40% Cu and 0.51 g/t Au over a 31.2m core length. The wedged hole (TS-24-30w1) intersected the Tesla Zone approximately 100m down dip, below the parent hole, where it intersected a thicker massive to semi-massive sulphide lens grading 7.66% Zn and 0.53% Cu over 7.7m followed by the lower copper zone mineralization. At this location, the copper zone was lacking the significant breccia intervals that were observed in the up-dip parent hole which tend to be associated with significant increases in copper grade. TS-24-30w1 returned several zones of lower grade stringer-style mineralization, including 6.2m grading 3.24% Zn and 0.88% Cu and 2.8m grading 1.15% Cu. A cross section showing the relationship of TS-24-30 and -30w1 to the other holes drilling in this sector of the Tesla Zone is shown in Figure 4.

TS-24-34w1 – Upper southern edge of Tesla Zone

TS-24-34w1 was drilled as an up dip, wedged hole from TS-24-34 which had previously intersected the copper-rich central part of the Tesla Zone. The wedge was designed to test a large gap in the drilling above the parent hole near the southern edge of the Tesla Zone. TS-24-34w1 successfully intersected multiple zones of mineralization with a pierce point located approximately 100m vertically above the parent hole. At this location, the hole appears to have intersected the upper edge of the copper stringer zone above the edge of the massive sulphide horizon. TS-24-34w1 intersected a 10.0m interval of stringer style mineralization grading 0.62% copper, followed by several other narrow horizons above the 0.5% Cu cut-off grade for the zone within the mineralized package. Finally, TS-24-34w1 also intersected the upper edge of the newly discovered lower footwall zone with a 2.0m interval grading 1.43% copper.

TS-24-29w1 and -29w2 – Highest up-dip tests of Tesla Zone

TS-24-29w1 and TS-24-29w2 were completed as two major up-dip step-outs from previously released parent hole TS-24-29 (see Foran November 18, 2024 news release), which had intersected the heart of the Telsa mineralization. The two wedged holes both intersected the upper edge of the Telsa Zone approximately 150m north and 250m vertically above the parent hole.

In detail, TS-24-29w1 and -29w2 both intersected the main Tesla zinc-rich massive sulphide lens followed by the underlying copper stringer zone. TS-24-29w2 intersected a 2.1m interval of massive sulphide grading 5.65% Cu, 4.53% Zn, 34.6 g/t Ag and 1.85 g/t Au, followed downhole by several intervals of copper-rich stringer style mineralization, including 4.0m grading 0.91% Cu and 2.0m grading 1.73% Cu. TS-24-29w1 was drilled a further 25m up-dip of the intersection of TS-24-29w2 where it continued to intersect mineralization along the current upper edge of the zone. TS-24-29w1 returned a 1.1m interval of copper-rich massive sulphide grading 5.90% Cu, and 6.26% Zn, 36.5 g/t Ag and 0.94 g/t Au followed by several zones of copper stringer style mineralization, including 6.0m grading 0.55% Cu.

These two wedged holes successfully expanded the Tesla Zone up dip beyond the limits of previous drilling in this sector of the deposit, where it remains open for further expansion with additional drilling. A cross section through the Tesla Zone showing the relationship of TS-24-29w1 and -29w2 to the surrounding drill holes is provided in Figure 5 below.

Table 1 – 2024 Summer Tesla Assay Results (*Denotes Previously Released)

Quality Assurance and Quality Control

Drilling was completed using NQ size diamond drill core and core was logged by employees of the Company. During the logging process, mineralized intersections were marked for sampling and given unique sample numbers. Sampled intervals were sawn in half using a diamond blade saw. One half of the sawn core was placed in a plastic bag with the sample tag and sealed, while the second half was returned to the core box for storage on site. Sample assays are performed by the Saskatchewan Research Council ("SRC") Geoanalytical Laboratory in Saskatoon, Saskatchewan. SRC is a Canadian accredited laboratory (ISO/IEC 17025:2017) and independent of Foran. Analysis for Ag, Cu, Pb and Zn is performed using ICP-OES after total multi-acid digestion. Au analysis is completed by fire assay with ICP-OES finish and any samples which return results greater than 1.0 g/t Au are re-run using gravimetric finish. A complete suite of QA/QC reference materials (standards, blanks, and duplicates) are included in each batch of samples processed by the laboratory. The results of the assaying of the QA/QC material included in each batch are tracked to ensure the integrity of the assay data.

Qualified Person

Mr. Roger March, P. Geo., Principal Geoscientist for Foran, is the Qualified Person for all technical information herein and has reviewed and approved the technical information in this release.

About Foran Mining

Foran Mining is a copper-zinc-gold-silver exploration and development company, committed to supporting a greener future and empowering communities while creating value for our stakeholders.  The McIlvenna Bay Project is located entirely within the documented traditional territory of the Peter Ballantyne Cree Nation, comprises the infrastructure and works related to development and advanced exploration activities of the Company, and hosts the McIlvenna Bay Deposit and Tesla Zone. The Company also owns the Bigstone Deposit, a resource-development stage deposit located 25 km southwest of the McIlvenna Bay Property.

The McIlvenna Bay Deposit is a copper-zinc-gold-silver rich VHMS deposit intended to be the centre of a new mining camp in a prolific district that has already been producing for 100 years. The McIlvenna Bay Property sits just 65 km West of Flin Flon, Manitoba, and is part of the world class Flin Flon Greenstone Belt that extends from Snow Lake, Manitoba, through Flin Flon to Foran's ground in eastern Saskatchewan, a distance of over 225 km.

The McIlvenna Bay Deposit is the largest undeveloped VHMS deposit in the region. The Company announced the results from its NI 43-101 compliant Technical Report on the 2022 Feasibility Study for the McIlvenna Bay Deposit ("2022 Feasibility Study") on February 28, 2022, outlining that current Mineral Reserves would potentially support an 18-year mine life producing an average of 65 million pounds of copper equivalent annually. The Company filed the 2022 Feasibility Study on April 14, 2022, with an effective date of February 28, 2022. The Company also filed a NI 43-101 Technical Report for the Bigstone Deposit resource estimate on January 21, 2021, as amended on February 1, 2022. Investors are encouraged to consult the full text of these technical reports which may be found on the Company's profile on www.sedarplus.ca.

The Company's head office is located at 409 Granville Street, Suite 904, Vancouver, BC, Canada, V6C 1T2. Common Shares of the Company are listed for trading on the Toronto Stock Exchange under the symbol "FOM" and on the OTCQX under the symbol "FMCXF".

CAUTIONARY NOTE REGARDING FORWARD LOOKING STATEMENTS

This news release contains certain forward-looking information and forward-looking statements, as defined under applicable securities laws (collectively referred to herein as "forward-looking statements"). These statements relate to future events or to the future performance of Foran Mining Corporation and reflect management's expectations and assumptions as of the date hereof or as of the date of such forward looking statement. Such forward-looking statements include, but are not limited, statements regarding our objectives and our strategies to achieve such objectives; our beliefs, plans, estimates, projections and intentions, and similar statements concerning anticipated future events; as well as specific statements in respect of our exploration plan's focus and objectives, including regarding targets, rigs, timing, drilling at certain locations, leveraging existing knowledge for further exploration, and expected results; our 2025 winter drill program, including our targeted 30,000 metres to be drilled utilizing eight drills; the upside potential of the Tesla Zone, including in respect of precious metals; our interpretation of structural and geophysical geoscience data, including in connection with identifying drilling targetsour ability to expand the Tesla Zone and Bridge Zone, and their growth potential; the potential of our mineral claims; our ability to uncover new mineralization within our mineral claims, drive Foran's growth and unlock further value for our stakeholders; our continued expansion and delineation of the Tesla Zone and Bridge Zone;  our drilling pipeline; our understanding and interpretation of geology and mineralization, including in respect of the Tesla Zone and Bridge Zone; the continuity of mineralization and other characteristics; the expectation that we will identify mineralization in certain areas; our infill drilling program at Tesla Zone, including its design and objectives; our ability to gather data in respect of the Tesla Zone for a potential future resource estimate, and our intention to prepare such estimate; our drilling techniques; our intention to continue exploring the Tesla Zone; Tesla remaining open for potential expansion; the relationship between Tesla and the Bridge Zone; our commitment to support a greener future, empower communities and create circular economies which create value for all our stakeholders while safeguarding the environment; expectations regarding our development and advanced exploration activities; and expectations, assumptions and targets in respect of our 2022 Feasibility Study. All statements other than statements of historical fact are forward-looking statements. The forward-looking statements in this news release speak only as of the date of this news release or as of the date specified in such statement.

Inherent in forward-looking statements are known and unknown risks, estimates, assumptions, uncertainties and other factors that may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements contained in this news release. These factors include management's belief or expectations relating to the following and, in certain cases, management's response with regard to the following: the Company's reliance on the McIlvenna Bay Property; the Company is exposed to risks related to mineral resources exploration and development; the Company has no history of mineral production; the Company's operations are subject to extensive environmental, health and safety regulations; mining operations involve hazards and risks; and the additional risks identified in our filings with Canadian securities regulators on SEDAR+ in Canada (available at www.sedarplus.ca). The forward-looking statements contained in this news release reflect the Company's current views with respect to future events and are necessarily based upon a number of assumptions that, while considered reasonable by the Company, are inherently subject to significant operational, business, economic and regulatory uncertainties and contingencies. These assumptions include the availability of funds for the Company's projects; availability of equipment; sustained labour stability with no labour-related disruptions; all necessary permits, licenses and regulatory approvals are received in a timely manner; and the ability to comply with environmental, health and safety laws. Although the Company has attempted to identify important factors that could cause actual results to differ materially, there may be other factors that cause results not to be as anticipated, estimated, described or intended.

Readers are cautioned not to place undue reliance on forward-looking statements and should note that the assumptions and risk factors discussed in this press release are not exhaustive. Actual results and developments are likely to differ, and may differ materially, from those expressed or implied by the forward looking statements contained in this press release. All forward-looking statements herein are qualified by this cautionary statement. The Company disclaims any intention or obligation to update or revise any forward looking statements, whether as a result of new information, future events or otherwise, except as may be required by law. If the Company does update one or more forward-looking statements, no inference should be drawn that it will make additional updates with respect to those or other forward-looking statements, unless required by law. Additional information about these assumptions, risks and uncertainties is contained in our filings with securities regulators on SEDAR+ in Canada (available at www.sedarplus.ca).

SOURCE Foran Mining Corporation

View original content to download multimedia: http://www.newswire.ca/en/releases/archive/January2025/14/c0859.html